 Product category
Search Certifications
Friendly link
|
Our News Working of the Solenoid valve
Posted:Dec 08, 2022 Views:130 Back to List
As it is an automatic valve first we need to understand when we need to open and close the valve. When the sensor senses that we need fluid on the outlet side the current will flow in the solenoid and due to which the plunger will act against spring and lift from the orifice. This will allow the fluid to flow. After the sensor senses that enough quantity of fluid is taken then it will stop the current and due to which the plunger will again chock the orifice and closes the valve.
In the case where we need more flow of fluid then the sensor will send the message to the power system and it will pass more current. Due to an increase in current, the magnetic field will increase and the plunger will lift more than the previous lift which will allow more fluid to flow through the orifice. So, based on the requirement sensor passes the current and according to that plunger will lift. |
